|
|
Build Your Online Product Catalogs?
Ductile cast iron socket and spigot pipes and accessories shall be centrifugally casted in accordance with ISO 2531(1998) class K9
Water tightness shall be insured by the push-on joint for the pipes
Composition and class
Metallurgical composition of ductile iron shall confirm to the following requirements (ISO):
3.5% to 3.9% Carbon
1.8% to 2.6% Silicon
Minimum tensile strength: 420(***) for pipes
Minimum elastic limits: 300(***) for pipes
Minimum elongation at failure: 10% for pipes
Maximum hardness: 230(HB) for pipes
hydrostatic pressure
The pipes of class K9 shall be subject to hydrostatic pressure test in the factory as follows:
DN80 to DN300:50 bars
DN350 to DN600:40 bars
DN700 to DN800: 32 bars
Internal Lining
The pipes shall be internally lined with a sulphate resisting blast furnace cement mortar. The thickness and the lines shall be in accordance with ISO 4179(1985).The lining shall be applied centrifugally.
External Coating
The pipes shall be externally coated in the factory with a metallic zinc coat as primer and a black bituminous or black coal tar based anticorrosive varnish in accordance to ISO 8179(1995). The zinc coat shall be applied by arc gun and the bituminous/tar based coat by an airless gun in at least 2 layers.
The advantage of ductile iron pipe
Ductile iron pipe has the nature of iron, the performance of steel, the anticorrosion performance, good scalability, and easy to install. It is mainly for municipal, industrial and mining water or gas supply and so on. In the low-pressure pipe network, ductile iron pipe with a safe and reliable operation, low damage ratio, easy and fast maintenance, Outstanding antiseptic property.
|
| Company: |
Qian'anshi Jintang Ductile Iron Pipes Co.,Ltd
|
| Contact: |
Ms. Zhang Min |
| Address: |
East of Xinzhai,Qian'an,Hebei |
| Postcode: |
|
| Tel: |
86 315 7173140 |
| Fax: |
86 315 7173140 |
| E-mail: |
|
|
|
|
Home
